Titanium vs composite diaphragms: what actually changes
Diaphragm material is one of the few specifications that buyers ask about by name, and one of the most misunderstood. The material does not simply sound brighter or warmer - it changes where the dome stops behaving like a piston.
The mechanism
A diaphragm is stiff until it is not. At some frequency the dome stops moving as one piece and starts to break up into modes. Below that point the response is controlled; above it, output becomes irregular. Material choice moves that point and changes how violent the transition is.
Titanium
Stiff and light, with a high breakup frequency that usually sits above the working band of a compression driver. The failure mode is sudden: when a titanium dome is overdriven it tends to crack rather than deform.
That is acceptable in professional use because it fails predictably, but it means the crossover point and power handling have to be respected.
Composite and polymer
Lower stiffness, earlier and gentler breakup, usually damped so the transition is less audible. These domes tolerate abuse better and are common in lower-cost and high-power designs. The cost is a lower usable ceiling: the same driver will not extend as far before the response becomes irregular.
What the datasheet will not tell you
Whether the replacement matches the original in thickness and forming. Two 44 mm titanium domes from different suppliers can differ in wall thickness enough to shift resonance. Where the original part is available, measure it; where it is not, treat the first sample as a check, not a production assumption.
Before you order
- Diameter and voice coil wire are the fit-critical values.
- Match the original material unless you are deliberately changing the driver behaviour.
- Confirm the recommended crossover point with the driver data, not with the diaphragm alone.