Guangzhou, China · Exported worldwide|WhatsApp|English
Voice Coil Knowledge

Voice coil former materials: aluminium, Kapton and fibre glass

Updated 23 Oct 2026 2 min read

Every voice coil is built on a former - the thin tube the wire is wound onto. It is rarely the first thing a buyer looks at, and it is often the reason a replacement coil fails early.

What the former actually does

Two jobs. It holds the winding in the gap at the right height, and it conducts heat away from the wire. The second job is the one that decides service life. A coil that fits perfectly but cannot shed heat will drift in impedance and eventually fail.

Aluminium

The best heat path of the common materials. Aluminium formers suit drivers that are pushed hard for long periods - subwoofers, bass bins, anything with continuous programme material.

The trade-off is eddy currents: the metal former interacts with the magnetic field, which adds a small braking effect and can colour the response. Many designs accept that in exchange for thermal headroom.

Kapton

A polyimide film. Electrically non-conductive, so no eddy currents, and stable at high temperature. It does not conduct heat as well as aluminium, so the winding runs hotter for the same power.

Kapton is common in midrange and high-frequency drivers, where the coil is lighter and the duty cycle is shorter.

Fibre glass

Cheaper than Kapton and more thermally stable than paper. It sits between the two on heat transfer and is often used in general-purpose replacement coils. Where a datasheet simply says fibre glass, ask for the winding height and the wire gauge - those values matter more than the material name alone.

What actually matters when replacing

  • Inside diameter and winding height: if either is wrong, the coil will not sit correctly in the gap.
  • Former material: match the original unless you have a reason to change the thermal behaviour.
  • Wire and impedance: a different impedance changes the load the amplifier sees.

Before you order

Send the driver model, the original coil dimensions and the intended use. Where the original former is unknown, say so - guessing here is expensive.

Related reading