Guangzhou, China · Exported worldwide|WhatsApp|English
Tweeter Diaphragm Knowledge

Tweeter diaphragm size guide: matching voice coil diameter

Updated 10 Nov 2026 5 min read

A replacement tweeter diaphragm is often described by the driver it fits, or by the diameter of the dome. Neither is the number that decides whether the part drops in. The fit-critical dimension is the voice coil diameter — the diameter of the wound coil bonded to the diaphragm. A difference of a fraction of a millimetre can stop a diaphragm from seating correctly.

This guide covers the eight voice coil diameters in the UYOman diaphragm range, the variants available in each, and how to check a replacement against a compression driver.

The voice coil diameter is the fit-critical dimension

A diaphragm is a dome, a voice coil and a mounting ring. The dome diameter is easy to see; the voice coil diameter is what centres the part in the driver's gap. Measure across the voice coil itself, not across the dome or the mounting ring, and take more than one reading with calipers.

Small differences matter. The catalogue contains a 51.2 mm diaphragm and a 51.5 mm diaphragm; they are different parts. It also contains a 99.2 mm diaphragm, while the largest compression driver voice coil in the current range is listed at 100 mm. Treat the number as an exact dimension, not as a nominal size.

Two checks avoid most wrong orders: measure the old part, and confirm the driver's voice coil diameter from its data. If the two disagree, stop and confirm before ordering.

The eight sizes in the UYOman diaphragm range

UYOman lists eight tweeter diaphragm models, with 58 variants in total. All current variants are 8 Ω; they differ in dome material, wire type and power rating. The table shows the eight voice coil diameters and the range available in each.

Voice coil diameterModelVariantsMaterialsWire typesRated power per variantPeak power per variant
25.5 mmUY-25.54titanium, compositeccaw40 W60 W
34.4 mmUY-34.48titanium, polymerccaw, ccar, flat-wire40 W80 W
44.4 mmUY-44.49titanium, composite, polymerccaw, ccar, flat-wire60 W120 W
51.2 mmUY-51.23titaniumccaw80 W160 W
51.5 mmUY-51.55titanium, polymerccaw, ccar80 W160–161 W
72.2 mmUY-72.212titanium, compositeccaw, ccar, flat-wire120–150 W237–300 W
74.5 mmUY-74.512titanium, compositeccaw, ccar, flat-wire120–150 W240–300 W
99.2 mmUY-99.25titaniumccaw, flat-wire180–300 W360–600 W

The range is not evenly distributed. The 72.2 mm and 74.5 mm sizes each carry 12 variants, while the 51.2 mm size has three. Where a size has fewer variants, confirm the exact variant rather than only the diameter.

What changes between variants

Dome material. Titanium accounts for 46 of the 58 variants, composite for 9 and polymer for 3. Material changes moving mass and breakup behaviour; the trade-offs are covered in Titanium vs composite diaphragms, and this guide does not repeat the comparison.

Wire type. The variants use ccaw (31), ccar (13) and flat-wire (14). The wire affects moving mass and winding geometry. Match the original unless the driver is being re-engineered.

Power. Rated power per variant runs from 40 W to 300 W, with peak ratings from 60 W to 600 W. The same model can contain variants at different ratings: UY-74.5 includes variants rated 120 W and 150 W, and UY-99.2 includes 180 W and 300 W variants. A model-level number is not the rating of every part in that model.

Impedance. Every current variant is listed at 8 Ω.

Matching a diaphragm to a compression driver

Match the diaphragm to the driver's voice coil diameter, not to the driver's model name. Use the driver's voice coil diameter as the first filter, then check mounting, power handling and crossover point.

Examples from the current catalogue:

- 25.5 mm diaphragm ↔ 25.5 mm driver voice coil (UY-TW-25.5), with a 25.4 mm variant on UY-TW-25.5-R. - 34.4 mm diaphragm ↔ UY-TW-350 series (34.4 mm). - 44.4 mm diaphragm ↔ UY-TW-450 series (44.4 mm). - 51.5 mm diaphragm ↔ UY-TW-518 series (51.5 mm). - 72.2 mm diaphragm ↔ UY-TW-820 series (72.2 mm). - 74.5 mm diaphragm ↔ UY-TW-850 series and UY-TW-DE800 (74.5 mm). - 99.2 mm diaphragm: the largest driver voice coil in the current range is 100 mm (UY-TW-44XT), not 99.2 mm — confirm before ordering. - 51.2 mm diaphragm: the closest driver voice coil is 51.5 mm — also confirm before ordering.

Diameter match alone is not enough. Throat, mounting pattern, power handling and recommended crossover also decide whether a diaphragm is suitable. If the old part is available, measure it; otherwise send the driver model and photos of the old diaphragm.

Standard and custom diaphragm options

The table below shows five standard models across the range. It is a map of what is available, not a recommendation by diameter alone.

ModelVoice coil diameterVariantsMaterialsWire typesRated power per variantPeak power per variant
UY-25.525.5 mm4titanium, compositeccaw40 W60 W
UY-44.444.4 mm9titanium, composite, polymerccaw, ccar, flat-wire60 W120 W
UY-51.551.5 mm5titanium, polymerccaw, ccar80 W160–161 W
UY-74.574.5 mm12titanium, compositeccaw, ccar, flat-wire120–150 W240–300 W
UY-99.299.2 mm5titaniumccaw, flat-wire180–300 W360–600 W

Browse all eight models and their 58 variants: Tweeter Diaphragms.

FAQ

How do I identify the diaphragm size? Measure the voice coil diameter, not the dome or the mounting ring. Calipers across the coil, more than one reading, and compare with the driver's data.

Is a 51.2 mm diaphragm the same as a 51.5 mm diaphragm? No. They are different parts in the catalogue, and the current driver voice coil closest to 51.2 mm is 51.5 mm. Confirm the driver's exact voice coil diameter before ordering.

Titanium or composite — which should I choose? That depends on the driver and the application. The comparison is covered in Titanium vs composite diaphragms; there is no universal answer.

Can you supply a diaphragm that is not listed? Yes — custom diaphragms are part of the OEM service. Send the driver model, voice coil diameter, material and wire preferences, and photos of the old part.

Next step

Record the voice coil diameter first, then confirm the variant: material, wire and power rating. For a replacement, the diaphragm replacement checklist covers the checks before disassembly. If no standard model matches, send the driver model and photos through OEM & customization and the team will confirm the closest option or what a custom diaphragm would require.

Related reading